Torque flange RT1 series
The torque measuring flanges of the RT1 series round off the lower levels of the measuring range offered by ATESTEO. They are ideal for measuring drag torque. The torquemeters are based on tried and tested high-performance infrared LEDs (light-emitting diodes) for data transmission. These LEDs are completely immune against electromagnetic disturbance during optical signal transmission and do not radiate electromagnetic waves. The various connection options offer flexible adaptation.
Our RT1 series torque transducers at a glance
Our strain gauge applied torque measuring systems with bearingless design, contactless signal transmission and including external evaluation unit type “eS”.
RT1eS
- Compact torque transducer with optional 2nd measuring range
- Nominal torque range: 5 – 100 Nm, freely selectable
- IR signal transmission for maximum immunity to interference
- Flange connection
- Accuracy class ≤ ±0,03 (5 – 100 Nm)
- bolt circle-Ø = 63 mm
- Outputs F, U, I, CAN, Alarm
RT1eS-B ETP
- Compact torque transducer with optional 2nd measuring range
- Nominal torque range: 5 – 20 Nm, freely selectable
- IR signal transmission for maximum immunity to interference
- with clamping bushing
- Accuracy class ≤ ±0,03
- bolt circle-Ø = 63 mm
- Outputs F, U, I, CAN, Alarm
Downloads
RT1eS-B RW
- Compact torque transducer with optional 2nd measuring range
- Nominal torque range: 5 – 20 Nm, freely selectable
- IR signal transmission for maximum immunity to interference
- with coupling
- Accuracy class ≤ ±0,03
- bolt circle-Ø = 63 mm
- Outputs F, U, I, CAN, Alarm
Are you looking for torque transducers with increased speed stability? Then you will find it here: Fast rotating torque measuring shafts
Interfaces for RT1 series
Because state-of-the-art electronic components are used systematically throughout, ATESTEO is able to make available all prevalent output signals without any additional electronics. The frequency outputs offer dynamics of up to 7 KHz. This makes ATESTEO measurement technology excellently suited for use on highly dynamic engine and motor test benches and test rigs. Where high current values are generated by rapid inverters, the IR data transmission offers maximum interference resistance. All this makes the technology from ATESTEO as effective as it is future-proof.
- Frequency (RS422): 60±20 kHz
- analogue output: 0-5 V, 0-10 V, ±5 V, ±10 V
- analogue output: 0-20 mA, 4-20 mA
- CAN (2B, 1kHz)
- RS232
- Alarm